+86 917 3228322   |   sales@belongmetal.com
         中  文  |  ENGLISH

      INDUSTRY NEWS

      Why metal molybdenum surface cleaning with alkali wash

      Why metal molybdenum surface cleaning with alkali wash


      Molybdenum is an important industrial material, widely used in aerospace, electronics, metallurgy, vacuum heat treatment furnace, semiconductor and other fields.


      In the process of processing and use, the surface of molybdenum is easy to form oxides, affecting its performance and service life. Therefore, molybdenum surface cleaning has become an important topic.


      Alkali washing is a commonly used cleaning method for molybdenum surface. This paper will discuss in detail why the surface of metal molybdenum needs to be cleaned by alkali washing.


      1、Molybdenum oxidation problem

      When molybdenum is exposed to air at room temperature, it will oxidize to form molybdenum trioxide (MoO?) and molybdenum dioxide (MoO?).
      This oxide layer will not only affect the surface quality of molybdenum, but also may have a negative impact on its mechanical properties and electrical conductivity.
      The removal of oxide layer is particularly important.

      2、The principle and advantages of alkali washing

      Alkali washing principle

      Alkali washes use alkaline solutions to clean metal surfaces, common alkaline substances include sodium bicarbonate (NaHCO) and sodium hydroxide (NaOH).
      These chemicals can chemically react with the grease, dirt and other impurities on the surface, converting them into substances that are easier to clean, so as to achieve the purpose of cleaning.

      Advantages of alkali washing

      Efficient decontamination: Alkali washing can effectively remove various contaminants on the surface of molybdenum, such as grease, dirt and oxides.

      Easy operation: alkali washing equipment is simple, easy to operate, suitable for large-scale production.

      Low cost: Alkaline substances are relatively cheap, and the alkaline washing process has low energy consumption, which helps to reduce production costs.


      3、the shortcomings and solutions of alkali washing

      Disadvantages of alkali washing

      Large electricity consumption: heating solution is required in the alkaline washing process, and the electricity consumption is high.

      Low efficiency: Compared with other cleaning methods, the efficiency of alkali washing is low.

      Unstable surface quality: Due to the complexity of the chemical reaction, the surface quality after alkali washing sometimes fluctuates.


      solution

      Optimization of process parameters: By adjusting the temperature, concentration and time of alkali washing parameters, cleaning efficiency and surface quality stability can be improved.

      Combined with other methods: alkali washing can be combined with other surface treatment methods, such as pickling, ultrasonic cleaning, etc., to achieve better results.

      4、Comparison between alkaline washing and other methods


      In addition to alkali washing, pickling is also a common metal surface treatment method.
      Pickling uses an acidic solution, such as nitric or hydrochloric acid, to remove the oxide film and impurities from the surface of the metal.
      Compared with alkali washing, pickling has a stronger oxidation capacity, but it is also more corrosive, if used improperly or the treatment time is too long, it will lead to the corrosion of the metal surface, and even affect its mechanical properties and surface quality.

      In practical applications, alkali washing and pickling can be combined.
      For example, in some metal manufacturing industries, alkali washing is often used as a pre-treatment method for pickling to clean surfaces and remove grease, dirt, and other impurities; Pickling is used as the final surface treatment method to remove the oxide film and other deep dirt, so that the metal surface is more smooth, flat and beautiful.

      Molybdenum surface cleaning using alkaline washing method has many advantages.
      The performance and service life of molybdenum products can be effectively improved by reasonable control of cleaning conditions and selection of suitable cleaning agents.
      In the future, with the progress of science and technology and the continuous growth of application demand, metal molybdenum surface cleaning technology is expected to be further developed and improved.

      CATEGORIES

      CONTACT US

      Frank Guo

      +86 13026443801

      +86 0917-3228322

      +86 0917-3228322

      sales@belongmetal.com

      Guojiacun Industrial zone, Maying Town, Weibin Zone, Baoji, Shaanxi 721000, P.R.China

      亚洲成片观看四虎永久网站,欧美一区二区开放视频,日本一区二区三区、在线,国产免费av观看一二三区